Will the room be X degrees cooler?
Not a published claim. The family card carries optical typicals. Field temperature is a project calculation.
Applications
Solar load on metal roofs and tank crowns, and selected walls. Indoor comfort outcomes depend on the building and are not stated as family guarantees.
A metal roof takes solar gain and radiates it into the volume below. Plant rooms and tank crowns see the same load. The starting point is the solar load and the existing envelope — not the finish code.
A white paint without stated reflectance and emittance is not a specified radiative system. A thick wall coat is not a substitute for a calculated board thickness in a building code.
Indoor temperature change and energy savings are not stated as family guarantees.
ST-C-RC is the radiative finish family. ST-C-EXT is the exterior-wall mid-coat. ST-C-INT is interior only. None of these is structural insulation.
Typical reflectance and emittance sit on the ST-C-RC family page. Specify from the current TDS.
Not a published claim. The family card carries optical typicals. Field temperature is a project calculation.
No. SHINETON does not specify this family using a fixed foam-equivalence ratio. Use the current TDS and project calculation.
No. Roof and crown: ST-C-RC. Exterior wall: ST-C-EXT. Interior: ST-C-INT.
Typical values live on the family page. Specify only from the current TDS for the supplied grade. System design stays with the buyer’s engineer.