1. Wall base
Sound substrate, dry, free of grease and loose particles.
ST-C-EXT
Envelope mid-coat for plant and building walls. Not a code-thickness replacement for board insulation.
Exterior-wall family. Equivalence claims versus foam board are not used on this site. Thickness is specified from the duty, not from a marketing ratio.
| Property | Typical figure | Note |
|---|---|---|
| Colour | White, tintable | Finish coat carries colour |
| Density | 0.57 ± 0.02 g/cm³ | As stated on the family card |
| Adhesive strength | ≥ 0.6 MPa | As stated on the family card |
| Water resistance | No defect after 96 h immersion | Family card |
| Fire performance | B2 as stated | Coating film |
| VOC | ≤ 80 g/L | As supplied |
| Continuous service | < 150 °C | Wall duty |
| Thermal conductivity | ≤ 0.046 W/(m·K) | Typical as stated for this family |
| Application | Spray or blade | Dry wall, moisture content preferably below 14 %; 5–80 °C |
Values on this page are typical figures as stated for this family. They are not SHINETON-guaranteed field results. Specify only from the current Technical Data Sheet for the supplied grade.
Operating conditions, acceptance criteria and system design stay with the buyer’s engineer. SHINETON matches the grade, issues documents and agrees inspection and shipment scope.
Sound substrate, dry, free of grease and loose particles.
Waterproof layer and levelling as the envelope design requires.
Insulation coat plus a weatherable topcoat.