1. Geometry
Buyer drawing for cell or module gap.
ST-S-FG
Die-cut pad for cell, module and cabinet gaps. A layer inside a tested assembly — not a thermal-runaway guarantee.
Glass-fibre facing. Thickness is custom. Runaway performance belongs to the pack test, not to this page.
| Property | Typical figure | Note |
|---|---|---|
| Facing | Glass fibre | Custom thickness typically 0.5–6 mm |
| Maximum service | 800 °C (inert) as stated | GB/T 17430-2015 named on the family table |
| Flame rating | UL94 V-0 | UL94-2013 as stated |
| Density | 210 ± 30 kg/m³ | GB/T 34336-2017 as stated |
| λ at 25 °C | ≤ 0.027 W/(m·K) | GB/T 10295-2008 as stated |
| Hydrophobicity | > 98 % | GB/T 10299-2011 as stated |
| Biosecurity screen | RoHS / REACH / ELV as stated on the family table | Attach current files with the pack |
| Format | Sheet / die-cut | Geometry from the buyer’s drawing |
Values on this page are typical figures as stated for this family. They are not SHINETON-guaranteed field results. Specify only from the current Technical Data Sheet for the supplied grade.
Operating conditions, acceptance criteria and system design stay with the buyer’s engineer. SHINETON matches the grade, issues documents and agrees inspection and shipment scope.
Buyer drawing for cell or module gap.
ST-S-FG only when the facing is glass fibre.
The pack owner runs the safety test. This sheet is one layer.