1. Name the cut
Particle-size grade first.
ST-P-AGP
Particle-size grades for formulators and compounders. Not a finished field coating.
Powder family. Grades are sold by particle size. A finished coating or blanket is a different ST code.
| Property | Typical figure | Note |
|---|---|---|
| Chemistry | Hydrophobic silica aerogel powder | Supercritical route as stated |
| AGP-10 | 10 µm grade | Hydrophobic powder |
| AGP-15 | 15 µm grade | Hydrophobic powder |
| AGP-30 | 30 µm grade | Hydrophobic powder |
| AGP-50 | 50 µm grade | Hydrophobic powder |
| AGP-80 | 80 µm grade | Hydrophobic powder |
| AGP-100-400 | 0.1–4 mm grade | Coarser hydrophobic cut |
| Use | Formulation and compounding | Not applied to pipe as a finished film |
Values on this page are typical figures as stated for this family. They are not SHINETON-guaranteed field results. Specify only from the current Technical Data Sheet for the supplied grade.
Operating conditions, acceptance criteria and system design stay with the buyer’s engineer. SHINETON matches the grade, issues documents and agrees inspection and shipment scope.
Particle-size grade first.
TDS / SDS for that cut.
The formulator owns the finished recipe.