1. Wall base
Clean, dry, sound. Repair before coating.
ST-C-INT
Indoor mid-coat for condensation, damp-wall inertia and occupied rooms. Comfort language only — no energy percentage on this page.
Interior-wall family. Dew-point behaviour depends on room climate and thickness. This page does not publish kWh or indoor °C savings.
| Property | Typical figure | Note |
|---|---|---|
| Colour | White, tintable | Finish coat carries colour |
| Density | 0.59 ± 0.02 g/cm³ | As stated on the family card |
| Adhesive strength | ≥ 0.6 MPa | As stated on the family card |
| Water resistance | No defect after 96 h immersion | Family card |
| Fire performance | B2 as stated | Coating film |
| VOC | ≤ 80 g/L | As supplied |
| Abrasion | Micro-flexible film | Family card |
| Continuous service | < 150 °C | Interior duty |
| Anti-condensation screen | ≥ 90 min as stated | Initial dew-point screen on the family card |
| Recommended mid-coat | 1–3 mm dry | System layers follow the interior specification |
| Application | Spray or blade | Dry wall; 5–80 °C |
Values on this page are typical figures as stated for this family. They are not SHINETON-guaranteed field results. Specify only from the current Technical Data Sheet for the supplied grade.
Operating conditions, acceptance criteria and system design stay with the buyer’s engineer. SHINETON matches the grade, issues documents and agrees inspection and shipment scope.
Clean, dry, sound. Repair before coating.
ST-C-INT at 1–3 mm dry as specified.
Interior topcoat where colour or washability is required.