1. Fit
Cut and wrap. Butt or lap on straight pipe; segmented elbows.
ST-B-FG
Flexible wrap for pipe, equipment and irregular geometry. Jacketed after the wrap.
Glass-fibre blanket family. Conductivity below uses the factory felt figure at 25 °C where that card exists; the handbook band is listed beside it.
| Property | Typical figure | Note |
|---|---|---|
| Colour | White | As supplied |
| Maximum operating temperature | 650 °C | Mid-temperature wrap grade as stated |
| Thermal conductivity | ≦ 0.021 W/(m·K) at 25 °C | Factory felt figure. Handbook band 0.016–0.020 W/(m·K) |
| Permanent linear change | ≥ −2.0 as stated | On heating, family card |
| Water absorption (WP) | ≤ 1.0 % volumetric · ≤ 5 % mass at 50 °C / 95 % RH / 96 h | Family card |
| Hydrophobicity | ≥ 98 % | WP grade as stated |
| Combustion | Grade A as stated | Inorganic wrap |
| Density | 180 ± 20 kg/m³ | As stated on the family card |
| Compression | ≥ 40 kPa at 10 % · ≥ 90 kPa at 25 % · resilience ≥ 90 % | Family card |
| Vibration mass loss | ≤ 1 % | Family card |
| Cited standards | GB/T 34336 · ASTM C1728 | As named on the family card |
| Form | Rolls, sheets, converted parts | Jacket required in service |
Values on this page are typical figures as stated for this family. They are not SHINETON-guaranteed field results. Specify only from the current Technical Data Sheet for the supplied grade.
Operating conditions, acceptance criteria and system design stay with the buyer’s engineer. SHINETON matches the grade, issues documents and agrees inspection and shipment scope.
Cut and wrap. Butt or lap on straight pipe; segmented elbows.
Overlap seams. Tie or band each layer.
Metal or specified cladding. This page is not the install spec.