1. Confirm fibre
ST-B-CF is not a drop-in for ST-B-FG.
ST-B-CF
Higher-temperature wrap grade. Do not interchange with ST-B-FG without the sheet for that fibre.
Ceramic-fibre route of the same blanket family. Mechanical and hydrophobic typicals follow the family card. The ceiling for this fibre is named on the issued TDS.
| Property | Typical figure | Note |
|---|---|---|
| Form | Flexible ceramic-fibre aerogel blanket | Wrap + jacket |
| Duty | Higher-temperature equipment and pipe | Not interchangeable with ST-B-FG |
| Thermal conductivity | ≦ 0.021 W/(m·K) at 25 °C as the felt family figure | Fibre-specific curve is named on the issued TDS |
| Hydrophobicity | ≥ 98 % | Family card |
| Combustion | Grade A as stated | Inorganic wrap |
| Water absorption (WP) | ≤ 1.0 % volumetric · ≤ 5 % mass at 50 °C / 95 % RH / 96 h | Family card |
| Compression family | ≥ 40 kPa at 10 % · resilience ≥ 90 % as the family card | Fibre-specific density on the issued TDS |
| Cited standards | GB/T 34336 · ASTM C1728 as applicable | Named on the family card |
Values on this page are typical figures as stated for this family. They are not SHINETON-guaranteed field results. Specify only from the current Technical Data Sheet for the supplied grade.
Operating conditions, acceptance criteria and system design stay with the buyer’s engineer. SHINETON matches the grade, issues documents and agrees inspection and shipment scope.
ST-B-CF is not a drop-in for ST-B-FG.
Same geometry rules as the glass-fibre grade.
Specified cladding. Inspection scope agreed per order.